Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who appreciates the responsiveness of gas cooktops, but still requires an oven to bake in? Find a dual-fuel range cooker that gives you the best of both worlds.
Gas cooktops are favored by many home chefs who have experience in the kitchen due to their superior temperature control. graded dual fuel range cookers allow them to use advanced cooking techniques, such as charcoaling. These powerful stoves can be costly particularly if they require an additional gas connection and an electrician for installation.
What is a 13amp outlet?
If you have a dual fuel range cooker (also called an electric and gas oven) then you'll require an appropriate 13 amp plug. The plug should be wired by a certified electrician to the cooker ring.
This ensures that the flow of current through the plug does not exceed the limit of safety which could cause an electrical fire. The plug has a fuse that controls the current. The fuse will blow as soon as it is deemed to be overloaded. This safeguards the appliance from overloads of electricity.
The fuse is rated at 13 amps, which is shown on top of the plug. This is the maximum amount of current that the plug could carry without damaging the appliance or heating the socket. It is crucial that when replacing fuses you always use the same amps as the original. If you replace the fuse with one that has the different ratings, you run the risk of overheating the socket and placing yourself and others at high risk.
A 13 amp fuse is likely to be a type of ceramic that is extremely durable and can withstand the high temperatures generated by a range cooker. Ceramic elements are also resistant to fire and is therefore a better option than other types.
There are a variety of ways to install the 13 amp plug. It may be wired to an existing live socket, and the flex is then connected to this by either a screw or a jaw-type cord clamp. The cord clamp should be tightened after the plug is firmly pushed into place.
Some plugs have a cardboard wiring diagram over the pins, and these should be removed prior to connecting the wires. The wires should be cut to the proper length, as when they are too long, they could be crushed when the plug covers are replaced. The earth wire should be the longest in order to connect it before the line and neutral pins.
How do I connect a 13amp plug?
The majority of dual fuel range cookers sold in the UK are wired to a 13 amp plug socket and this is vital because ovens draw a considerable amount of current, and the standard plug sockets are rated at 10 amps.
In general, new appliances should be fitted with a plug at the point of sale. This is to comply with the Plugs and Sockets etc. (Safety Regulations) 1994. Older appliances may not have a plug connected and this could be the reason for the issue.
The first thing to do when connecting a cooker with an existing plug socket is to check that the fuse rating in the fuse box is in line with that of the plug. This is important since a fuse that is not properly sized can be dangerous.
It is also recommended that the fuse has been fully seated in the cartridge, and there isn't any excessive movement. The next step is to prepare the flex to be used. First remove the sheathing from the flex in order to expose the three insulated conductors within. Next nick the sheathing at the point of entry to the plug (beyond the cord grip) using a knife without penetrating the individual conductors that are insulated. This nick must be large enough to allow for the sheathing and cable to separate as the sheathing is pulled back. Cut off the excess sheathing, leaving about 40mm beyond the flex.
The flex is positioned over the plug, with the earth terminal at the top and the neutral and live terminals at the bottom. Utilizing the colored conductors to guide you and the sheathing is removed from each pin, and the internal cable is inserted into the appropriate terminal using the cord grip. If the plug is fitted with a screw type cord clamp loosen it, and then pull back the insulation to expose the copper conductors. Connect each wire insulated to the appropriate terminal by using the plug's channel. Begin with the earth conductor, then the neutral, and finally, the live.
What is the maximum draw of a plug with 13amps?
The maximum current draw for 13amp plugs at 300 volts is 3kw. This is a significant amount of power, however the standard fuse in the UK plug will not fail until the cable is heated to a dangerous temperature. It is essential to be aware of the power you're using in your kitchen as a faulty plug or socket can cause a fire.
The ceramic fuses that are used in plugtops are approximately 25mm and are suitable for mains voltages of 240V. The fuses are marked with an BS Kitemark or similar mark on the side and they'll contain sand. stainless steel range cooker dual fuel or glass alternatives are available, but should never be used in combination with a live plug.
In the UK, most dual fuel range cookers are hardwired. They cannot be plugged directly into a wall outlet. They are typically connected to a separate cooker ring circuit, which is only suitable for appliances that draw up to 20 amps.
You can test the ring circuit of your home by checking the fuse box, or by speaking to an electrician in your area. Ask whether the sockets are connected to the same ring or if they're distinct. They should also be able to inform you if there's an individual circuit that powers your oven.
The size of your kitchen will be one of the main factors when you are looking to purchase a dual fuel range cooker. We have a large choice of cookers to fit any space, from compact 50-60 cm dual fuel models, as well as massive 90cm + double oven models from top brands like Rangemaster and StovesAreUs.
If you're after something a little more unusual Don't worry, we also have a great range of gas and electric multi-functional cookers. These multifunction cookers can be used to cook a variety of dishes such as pasta, casseroles and curries!
Currys offers a broad selection of Cookers. Explore our online selection or visit us in store to view them. We offer free home delivery and installation on selected range cookers and we also offer flexible payment options. If you have any questions our team is on hand to help by sending us an email or give us a ring. Credit is subject to status and terms & conditions apply.
What is the maximum draw of a switch for a cooker?
There is lots of confusion regarding what the maximum current draw of a cooker switch actually is. The majority of cookers are hard-wired and connected to an oven-ring circuit and not the standard socket. This is because they will often draw more than 20 amps of power when both the electric oven and gas hob are in use.
There aren't any dual fuel range cookers that can be installed in a standard socket since this could pose an enormous fire risk and infringe electrical regulations. A licensed electrician must always install new electrical circuits in the kitchen, connecting them to the cooker. They will also ensure that the total load of the oven and hob do not exceed the circuit's power supply capacity.
Dual fuel range cookers blend the ability to cook with the sensitivity of a gas stove with the precision and precision of an electric oven. They are therefore a favorite among both home cooks and chefs. If you want to try different cooking techniques such as searing and charring, a dual fuel range cooker is the perfect choice.
When you are looking to purchase an appliance for your kitchen, you will need to consider several factors such as size, functionality and price. You will also need an electrical connection to your home for the appliance. If you're unsure you're not sure, it's recommended to get a Gas Safe engineer inspect your property prior to installation.
The Currys range of dual fuel range cookers includes options that can be adapted to a range of budgets, ranging from low-cost models from Indesit and Zanussi to our exclusive Essentials collection. If you're looking for something bit more sophisticated, we also stock a wide selection of premium JennAir ranges, which come with many innovative features.
If you are buying a brand new dual fuel range cooker, it is essential to read the manual of the owner for specific information regarding the gas and electrical requirements. You will require an electric connection to your home. A plumber may be required to set it up for you. Depending on the home you'll also have to make sure that you have a cooker ring circuit that is installed and approved by a licensed electrician.